Best Hybrid Table Saw 2020 Reviewed – Top 5 Hybrid Table Saws For The Money


Getting a hybrid table saw is a good investment for your workshop and other tasks. It is a tool that can save a lot of time and help do your work more efficiently. But selecting the right one is not easy.

With many companies making such machines, with different models being in the market and offering different features, it can be a challenge to arrive at the right one.

Do not worry, all you need is a guide that will help you understand the things to check whenever you are choosing a hybrid table saw. In this guide, you will find all the tips you need.



Top 5 Hybrid Table Saws

1. Dewalt (DWE7491RS) 10-Inch Table Saw


The Dewalt is a cutting-edge high-powered table saw designed for hardwood material. The saw comes with a 15 Amp high torque motor that offers excellent cutting and ripping power. It can help you to cut filler boards, deck boards, framing lumber, rail caps, and many more. 

The best part is that the device can do most of it without any external adjustment tool. It has a build-in support table, rack and pinion adjustment system, and printed scales that you will need to adjust the cutting angles and other aspects. You can use it for both 45 degrees and 90 degrees angular cutting without any problem. It will allow a cut of 3-1/8 inches at an angle of 90 degrees and a depth of 2-1/4 at 45 degrees.

The saw even offers you a dust port for easy vacuum cleaning and a flip-over ripping fence to help with narrow rip cuts. Not to mention, its on-board storage space and the heavy-duty wheel that offer easy locomotion and access to your tools.

  • Weight: 90 pounds
  • Size: 31*24.5*31 inches
  • Speed: 4800 Rpm with no load
  • Torque: 15.0A
  • Power source: Corded-electricity
  • Cutting Diameter: 10 inches
  • Dust connector port for efficient vacuum cleaning
  • 15-amp motor to rip wood
  • Rack and pinion system for easy faster, smoother and accurate operation
  • 3-years warranty
  • The miter gauge that comes with the devices is not much efficient


2. Metabo HPT Table Saw

Metabo HPT is the sturdy legged power saw developed for rip sawing and cross-cutting of wood, plywood, and composite material. The device is the best of its kind and has a very robust powering system. It uses a direct drive, and a 15 Amp high torque motor to power rotates the blades. This system ensures a rotational speed 0f 4500 rpm, which is enough to cut even hardwood variants with minimal effort.

The engineers of this saw have also paid extra attention to its recoiling and safety features. They have built it with a soft start system for low noise and controlled startup of the machine. They have also installed an oversized kill switch to cut the power of the motor in case of an emergency. You will find it approximately at the knee level, which makes it easy to cut power without any delay.

Apart from safety, the machine is also excellent in terms of its tables and overall built. The whole device is foldable and also has a stand to store it in this condition. As for the table, it’s a telescopic structure that allows extension support of 35 inches ripping capacity at right and 22 inches on the left side. Whether you use the saw for DIY, cabinet making, or any such construction, it will never disappoint you.

  • Weight: 96 Pounds
  • Size: 32*32*31 inches
  • Speed: 4500 Rpm
  • Table Material: Aluminum
  • Power source: Corded Electricity
  • Beveling range of 45degrees
  • Power switch comes with an emergency off safety cover
  • Soft start function for minimal recoil
  • Direct drive system powered by a 15-amp motor
  • Allow multiple bevel angles
  • Comes with most tools that you will need to adjust it
  • 2-years warranty
  • The bevel angle cannot go beyond 45 degrees


3. Rockwell Rk7241s Table Saw

If you are looking for a saw, that’s a bit high on power and low on price, then try the Rockwell Rk7241s. The hybrid saw is best of its kind and exceeds most of the saw in its price range. It offers you 4800 Rpm of rotational speed that guarantees a deep yet precise cut. You can expect it to provide a depth of 3 -9/16 inches at 90 degrees and a depth of 2-9/16 inches at 45 degrees. It is efficient for cutting wood, plywood, frame logs, and even hardwood variants.

Its developers have also attached a laser on the cutting blade housing to mark the cut spot. You can use this laser to minimize error possibility for precise cutting. They have also done a great job on the overall structure of the saw. The device has a 10 inch work table that you can extend to up to 30 inches. It even has an inbuilt handle and wheels that ensure easy portability of the device.

  • Weight: 88.2 pounds
  • Size: 38.8*27.6*18 inches
  • Speed: 4800 Rpm
  • Power source: 120-240 volts
  • Comes with miter gauge, push stick, riving knife and several other tools and accessories
  • Marking laser with auto angle adjustability
  • 30 inches cutting table
  • High powered yet lightweight saw
  • Multiple bevel angles 
  • Wide dust port with attached dust bag for cleaner operation
  • 2-years of limited warranty
  • The laser marker is not suitable for bright work areas


4. Shop Fox W1837 10″ 2 hp Hybrid Table Saw

The shop fox W1837 is one of the best hybrid table saw available in the market. It has a clean functioning, sturdy structure and a very powerful cutting efficiency. Its developers have used a high torque 15-amp single-phase motor in it. It offers 3450 Rpm rotating speed, which is more than what most hybrid saws can offer.

This motor, combined with the high strength blade of the saw, can offer an excellent cutting depth of around 3-1/4 inches in normal condition. This depth will get affected by angular changes, but it will never drop below 2-1/4 inches.  

The saw also offers a very good build structure to help you with your work. It has a cast iron table with steel wings that can offer a rip space of 30 inches to the right and 15 inches to the left. This table also includes a guard to protect you from the running blade and a wide 4 inch port for dust disposal. It even includes a safety switch to cut power if something goes wrong. You can use it in workshops, homes, or any other place without any problem.

  • Weight: 260 pounds
  • Size: 58*38*36 inches
  • Speed: 3450 Rpm
  • Motor power: 2 Horsepower
  • Fully enclosed cabin with 4-inches dust port to eliminate unwanted spills
  • Powered by 2-HP single-phase that can run on both 120 and 240-volt input
  • Allow tilt cutting angle of up to 45 degrees
  • Easy kickstand mobility system for easy portability
  • 2-year warranty
  • Heavier than most hybrid saw


5. Powermatic Pm1000 1791000k Table Saw

For the saw user who needs a machine with high performance but low power supply requirement, the Powermatic pM100 is an excellent choice. The machine is one of the very few hybrid machines that can work with 115 volts of electricity without compromising the performance. It can offer you approximately 4200 rpm cutting speed, which is enough to pierce even the hardwoods.

Another good thing about the machine is its blades and delivery system. The saw uses a poly-v belt delivery system that low on vibration and high in efficiency. Combined with the 1-3/4 horsepower motor of the saw, this delivery system makes the saw perfect for plywood, frame logs, cabinet works, DIY, and a lot of other tasks.

  • Weight: 418 pounds
  • Size: 36*27.5*63.8 inches
  • Speed: 4200 Rpm
  • Motor power: 1-3/4 HP
  • Power source: Corded electricity supply
  • High-grade cast iron table for long life
  • Flexible for a supply of both 115 and 230 volts
  • 20*27 inches table size
  • Allow miter gauge pivot of 60 degrees on both sides 
  • Large 7 inches wheel for easy height and bevel adjustment
  • V-belt drive for minimal energy loss and vibrations
  • Doesn’t includes a thin-kerf riving knife



Buying Guide: Hybrid Table Saw

After looking into various features, you can be sure that these are the factors you need to consider to get the best hybrid table saw.



For a hybrid, table saw that will serve its purpose and in the right manner, power is a vital factor to consider. You do not want to buy a machine that is not powerful enough to handle your work. That will slow you down.

At the same time, you do not want to buy a machine that is too powerful for the kind of work you have. That becomes difficult to handle and may result in instability, poor accuracy or accidents.

The best thing to do is to make sure that you get a machine with the right amount of horsepower.

Here are some facts that can help you. With saw with between 1.5 and 2 horsepower, the motor is able to make 18-24 amps and can work on a 120V circuit. As a result, it is able to cut through up to 2 inches of hardwood.

For one with 3-5 horsepower, it will require a 240V circuit. It can handle more work with the ability to cut through 3 inches of hardwood thickness. 

Make sure that you consider the amount of power you need before making the purchase.



In this case, you will be looking at both the accuracy and the ability of the machine to make smooth cuts. Since you are buying your hybrid table saw to use on cutting wood, then it must be accurate on any type of wood.

What this means is that you should be able to make beveled cuts, crosscuts and rip cuts with precision and accuracy.

It should be made of a blade that can give room for various types of wood without messing the results. Make sure that the miter gauge is as accurate as possible.

You can also find reviews from previous owners of the machines to know more about its performance when it comes to cutting. In case there are complaints about accuracy, then you should go for a different one.


Rip Capacity

Rip capacity has to do with deeper details into what you will be using your hybrid table saw for. Rip capacity is a feature that provides that clear-cut indication of what wood to deal with. 

As a result, based on the type of work you would like to cut, you can choose the best rip capacity. For someone planning to work on wide boards and plywood, for example, you will need a table saw with a rip capacity above 24 inches. 

In cases where you do not know exactly what you will be working on, do not worry. You can get any measurement that feels okay for you and it will work for you.


Riving Knife

A riving knife is very important when using a hybrid table saw as it helps in preventing kickback. Kickback is among the risks associated with using a hybrid table saw. By having a good riving knife, the risks of kickback are reduced significantly.

For this reason, you should go for a machine with a riving knife whose curve and that of the blade are the same. It should also maintain its position whenever you raise, lower or rotate the blade. It should also have a quick-release mechanism.

This is not a must feature but it is worth getting whenever you want to get the best product.


Ease of Adjustment 

When using a hybrid table saw you will find out that there are many instances where you have to adjust the blade. It is a feature you have to consider. In many cases, you will need to align the blade based on your work.

Always make sure that you get a machine that offers an easy experience when adjusting the blades. This will improve your work quality.

Make sure that the bevel, fence position, as well as the blade height, can easily be adjusted with comfort. 

Adjustment goes a step further into maintaining the machine parts. Ensure that the table saw’s parts can easily be lubricated. Generally, the machine should allow easy access to the parts for adjustments and maintenance.


Table Space

Different types of hybrid table saws will come with different sizes of table space. As a result, it is important to consider this factor since not every space is okay for you. The first thing you do is look at the type of wood you will be working on.

That will give you a good idea of the tablespace you need. If you will be working on large wood pieces then you need large table space. In case your wood pieces are small, then you may have to take a saw with a small space.


Dust collection

How do you want your work environment to be when using your table saw? There are table saws that come with the option for dust collection and control. If you do not want too much dust when working you can get one with this feature.

It is not a must-have feature but it can be really exciting to have it as it keeps the environment relatively clean when using the machine.


Blade guard

It is designed as an enclosure above the saw blade to prevent you from mistakenly place your hand on the blade.

Some table saws will not come with this feature while others have it. It is a good safety measure that is worth considering when buying a hybrid table saw. Unless you do not want to be safe at all times. 

Get one that can keep you safe at all times.


Extension table

Did you know that there are table saw models that come with an extension table? It is meant to give you more room whenever you are working. It can come in handy especially when you are working on several and large pieces of work.

Basically, it is a feature that will make your work easier. The good thing is that it can be disconnected. So, you can choose one with an extension table and you can disconnect it when you do not need it.



The construction material and style of any machine determines its durability and reliability. Same case here. You have to make sure that you go for a well-built machine that can serve you for a long time.

Different brands will use different materials on the body and that matters a lot. Metal parts are known to be the best when compared to plastic ones for durability. Some are also made of cast iron.

At the same time, you will find others that come with aluminum and steel. 

Make sure that you compare these factors to arrive at your best hybrid table saw.


Weight and size

The size of the table blade is worth considering depending on where you will be using it. Some machines are too large that it becomes a challenge to handle them whenever you need to move them or find a place for storage.

The weight of the machine is also important. You do not want to get a machine that is too heavy that it will always be a problem whenever you need to move it. As long as it can work very well, then it doesn’t have to be too heavy.



The reality is that there are hybrid table saws that are too expensive. When buying such a machine you will be doing a serious investment and you have to make sure that you get the value for your money.

Do not end up spending too much on a machine that won’t serve you the way you want. To easily select the best model when it comes to price, make sure you compare the features of the machine and the price.

That way you will be able to buy the right machine and for the right cost.

Remember that the better the machine the higher the price.


Frequently Asked Questions

A Hybrid Table Saw. What is it?

It is a saw that is made and designed with features of both a portable contractor and a cabinet saw.

Can I use an extension table on a hybrid table saw?

Yes. It is not a must, but you can use it whenever you want. All you have to do is get a hybrid table saw with an extension table


Please enter your comment!
Please enter your name here